A Dressing for success
Water & Wastes Digest
February 2008
By Ken Rose
Ken’s Foods invests in a wastewater processing system and serves up efficiency & dependability
PDF Version
Parameters for Water Quality Field Testing
Water & Wastes Digest
October 2004
By Tony Pagliaro
The most important clues for a water treatment professional’s decision-making process come from accurate water quality analysis information.
Integrated Technology Simplifies Dewatering Process at Two Municipal STPs
Water & Wastes Digest
October 2002
In the late 1990s, one western Pennsylvania sewage treatment plant (STP) sought to process Class B biosolids on-site, eliminating the expense of hauling liquid off-site and significantly decreasing associated labor costs. At the same time, the plant needed to achieve higher cake solids and provide strict odor control. In addition, the selected equipment also had to be able to greatly enhance process efficiencies at not just the one plant, but its sister facility as well. Fortunately, USFilter offered a fairly simple solution to meet the STP's seemingly complex needs.
New Cartridge-type D.O. Sensor Saves Time, Money
Water & Wastes Digest
April 2001
By Jim Klauer
To address the inherent measurement problems of electrode contamination, electrolyte depletion, and membrane coating, GLI International, Inc. has introduced a dissolved oxygen sensor featuring a replaceable membrane cartridge.
PDF Version
Cooling Tower Solutions
Water Quality Products
April 2001
W. Craig Meyer, Pierce College
Recently, cooling towers have become recognized as a major source of Legionella infection. This fact has stimulated a growing number of lawsuits and it is expected that this trend will continue.
Effluent Diffusers Improve Water Quality, Meet Regulations
Water & Wastes Digest
March 2001
WWD Staff
In order to obtain a better permit, a Midwest plant needed to significantly reduce the pollutant concentrations being produced by its current level of discharge. Working with a consultant, management decided an effluent diffuser would be a more reliable and cost-effective option than altering the treatment process or installing a second outfall line.
PDF Version
Unique Dewatering Method Minimizes Handling
Water & Wastes Digest
February 2001
Edited by WWD staff
Throughout the 70s and 80s, a dramatic evolution took place in the area of environmental regulations. In the midst of these rapidly changing government mandates, numerous technological advancements were made, as business and industry raced to keep in compliance. One such technology was "dewatering."
PDF Version
Data Acquisition, Legacy Systems and Your Intranet
Water & Wastes Digest
February 2001
By Fred Noble
There are lots of parallels between the events of November 2000 and the events that take place in any factory or municipality that runs a process or monitors its effluent. The technology exists to achieve the much-talked-about six sigma (3.4 errors per million events) levels of measurement quality or process integrity. But antiquated legacy systems keep getting in the way. And, as is the case on the American political scene, it just is not that easy to replace those old methods of measuring things.
Automatic Samplers Designed to Improve Efficiency, Control
Water & Wastes Digest
September 2000
ISOLOK® automatic samplers offered by Bristol Equipment Company in Yorkville, Illinois, draw measured portions of liquids or slurries on command from electrical or all-pneumatic controls. Actuated by a single compressed air cylinder, for greater safety in dusty or volatile environments, the sampler taps process streams moving through pipes or vessels pressurized up to 300 psi, as well as troughs or tanks.
Municipal Sludge Dryer Produces Higher Solids Off the Press
Water & Wastes Digest
February 2000
A municipal sludge dryer was designed and installed by USFilter’s Davis Products for the Oconee County South Carolina Sewer Commission at the Coneross Wastewater Treatment Plant. The dryer is integrated into existing dewatering facilities for the purpose of drying sludge into a Class A biosolid product.
Oxygen-enhanced Incineration Increases Throughput, Decreases Emissions
Water & Wastes Digest
February 1997
In most wastewater treatment facilities, solids handling is the single most expensive operation. Innovative oxygen injection technology, combined with vacuum pressure swing adsorption (VPSA) oxygen supply systems, allows a plant to achieve a dramatic increase in personnel and equipment productivity with a minimal capital expense Ñ while reducing emissions.
Scalping Biosolids: A Sludge Dewatering Alternative
Water Engineering & Management
November 1995
Lawrence M. Kaplan, P.E.
By constructing and operating a scalping facility, some wastewater treatment plants can achieve great reductions in hauling and tipping fees.
Long Range Planning for Biosolids Management
Water Engineering & Management
February 1995
Margaret Norton-Arnold, Lisa Fitzhugh and Vicki Fischer
Given the regulatory demands imposed on sludge disposal, options for action have to be investigated carefully.
|